Larry W wrote:
I'm not familiar with that model of sander but sanders in general use
lots of air, about like having a small blow gun constantly on. I'd
estimate you'd need a good 8-10 CFM at 90PSI +/- for extended use of
a pneumatic ROS.
snip
The Porter Cable PTS-6 requires approx. 15 SCFM @ 90 PSI.
http://www.toolfetch.com/Brand/Porte...20cable%20PTS6
The compressor would have to be in the 5 to 6 horsepower range.
--
Jack Novak
Buffalo, NY - USA