dansawyeror wrote:
All,
The gear has a dial with a small, striped allen screw. The tool is 1.5
mm. Any thoughts on how to get this off?
Thanks - Dan
I use Torex tips, Just jam them in..
other tricks I've done is put a very small spot
of expoxy on the end of the key wrench and stick
it in the head and let it set.., then turn out the
screw and replace it.
--
"I'm never wrong, once i thought i was, but was mistaken"
Real Programmers Do things like this.
http://webpages.charter.net/jamie_5