On Apr 11, 5:18 am, wrote:
"The spec sheet says to use branch circuit protection of 30A minimum
and 35A maximum. The spec also says to use wire of at least 22A
ampacity. This all seems reasonable so far.
"

Am I the only one that sees a problem with the above?

Actually, this thought occurred to me right off the bat.

I can assure you that the factory spec says 22A ampacity,
30A min breaker, 35A max breaker.

In any case, I am using 50A ampacity (8 ga) wire, and a 30A breaker.