Thread
:
RG-6 QS, top brands?
View Single Post
#
11
Posted to comp.dcom.cabling,rec.video.cable-tv,alt.home.repair,alt.cable-tv,rec.radio.amateur.antenna
Paul Franklin
external usenet poster
Posts: 306
RG-6 QS, top brands?
On 6 Apr 2007 08:29:32 -0400,
(Al Dykes) wrote:
In article ,
Paul Franklin wrote:
On Fri, 06 Apr 2007 03:27:04 GMT, "Jerry Martes"
wrote:
snip
Belden, Alpha and Carol are all good. As important as the cable are
the connectors. The compression type are the way to go, IMO. Invest
in a good QS stripper and a compression tool. Don't bother with crimp
tools and don't even think about twist-on.
What's the diff between a compression tool and a crimp tool?
OT: I inherited break/fix responsibility (billable by the hour) on a
business thinwire lan that was installed by a TV cable guy. He used
twist-ons and no crimp rings. That site paid my rent for a couple
years, until I eventually replaced all the connectors with proper
ends.
For that reason, I've always looked fondly on twist-ons, in a bizzare
way.
The compression fitting have a captive sleeve on the cable end of the
fitting. You strip the cable more or less as usual, slide it up
through the connector as you would with a crimp type. But then the
compression tool presses the sleeve up into the body of the connector.
The inside is tapered, so when the sleeve is pressed in, it compresses
against the cable, locking it tightly into place.
Here's a pictu
http://www.cablestogo.com/product.as...=411&sku=41077
They are also available with seals for water resistant outdoor use.
(In fact, the picture is of a connector with seals.)
Here's what the tool looks like:
http://www.cablestogo.com/product.as...1403&sku=38011
Try 'em, you'll like 'em!
Paul
Reply With Quote
Paul Franklin
View Public Profile
Find all posts by Paul Franklin