we connected - for those looking for me, I can be found via www.wbnoble.com
collets and collet holders are available from www.use-enco.com though for
this application it may not be a pure stock item. There is of course the
possibility of adapting a C5 holder

wrote in message
ups.com...
Hi Prometheus

I got sidetracked and found you question on the collet holder, and yes
there are things like that, they tend to be a little expensive, for
the precision machining thats needed for those items.

They do have a very limited range, and come mostly in standard sizes
only.

Anyway here's a link to a set that would fit right onto your lathe.

http://www.leevalley.com/wood/page.a...330,49238&ap=1

Have fun and take care
Leo Van Der Loo

On Mar 28, 7:09 am, Prometheus wrote:
Hi Bill-

I know you make faceplates and other assorted goodies, so I figured
you may be a good guy to ask-

I'm looking at the possibility of mounting an adapter of some sort to
my Delta 1" x 8 tpi spindle that would allow me to use a more-or-less
standardcolletlike the ones you'd find in a metal working mill or
lathe.

The theory is that I could then mount various cutters in the beast so
that I could machine some of the parts for the metal lathe I'm working
on with the aid of some other fixtures that would be easy enough for
me to make myself. Offhand, I'm envisioning an adapter that is about
1.5" in diameter that is around 3-4" long that can screw onto the
headstock thread. I can put a drawbolt through the headstock to pull
thecollettight.

I'd make it myself, but it's bound to be nicer if you can turn it on a
metal lathe than if I make it with a bit of pipe and a welder.

Any chance you've got the tooling to do such a thing? If so, how much
do you figure an item like that might cost? I can come up with more
specific specs if you think it's worth your while to take on the
project. Otherwise, I'm sure I can come up with something that will
work by other means.

Thanks!





--
Posted via a free Usenet account from http://www.teranews.com