View Single Post
  #7   Report Post  
Posted to alt.home.repair
JoeSpareBedroom JoeSpareBedroom is offline
external usenet poster
 
Posts: 2,901
Default rail/track lighting for kitchen

"DLK" wrote in message
oups.com...
On Mar 8, 12:09 pm, "JoeSpareBedroom" wrote:
"DLK" wrote in message

ps.com...





Does anyone have suggestions for specific rail or track systems/
fixtures for lighting a kitchen?


I am interested in replacing my current fluorescent fixture and
installing a curved rail/track system (mainly for esthetic reasons),
but I am concerned that it won't provide enough general light. I have
seen some kitchens with track systems that look dark. It has been
suggested that I use wall washer fixtures and fixtures with a metal
interior to redirect light. The kitchen is 9-10 ft long and I do not
need pendants.


Also, I thought that a fixture with transformer that could be mounted
anywhere would be best because the hole for the wiring is off-center
in a concrete ceiling. That way, the track could be centered and the
transformer could be placed slightly off to the side. I can't think
of any other type of fixture that would address that irregularity with
the wiring and still be centered in the room.


Low voltage or line voltage? Halogen bulbs?


Any suggestions on brands, types of systems, heads are greatly
appreciated.
Thanks.


I haven't seen every track lighting installation on earth (yet), but most
of
what I've seen leaves me unimpressed. The lighting is uneven, and
depending
on how they're located, people see the light bulbs, which at least to me
is
a sin. I want to see light, not bulbs. I'd rather have light reflected
onto
surfaces by closely mounted pendants or wall sconces.- Hide quoted text -

- Show quoted text -


This is my concern as well. My problem is dealing with this off-
center wiring...not sure what other type of fixture I can use.
Perhaps there is a track head that covers the bulbs in some way?



Nobody here can tell you what options are available from all track light
manufacturers.

As far as the off-center problem, you could use surface mounted wire channel
to bring power to the center of the ceiling, where you'd install a surface
mounted box to hang a fixture.