Diode identification?
"John E." wrote in message
obal.net...
It's shorted, burned on the side against the board, the side of the diode
that has part of the p/n printed (of course)...
Best I can make out is (reading around the diode:
ITT
4?
47
Physically it resembles a typical 1A black epoxy rectifier.
Would this be 1n4147? The "47" is clearly visible, and I think I can make
out
a "4" in the first part of the poorly-legible digits. No telling how many
digits between the two "4"s.
Any possibilities other than 4147?
Thanks,
--
John English
Unfortunately a 1N4147 is a small signal glass diode.......
I would take a guess that what you have got is a zener diode.
Try googling for a 1N4747.
If it's ****ed then something else might have ****ed it so check the rest of
the circuit. However it sounds like it might have been slowly ****ed so you
might want to re-design the circuit.
DNA
|