My new Miller Syncrowave 180SD "Tig Runner" package was just under
$1,600 delivered to my door, even though they list it at about $2,000 on
their website: http://www.millerwelds.com/products/...rowave_180_sd/
David



"Chief McGee" wrote in message
news:snt0c.10683$PR3.227192@attbi_s03...
Need to weld 4130 tubing, .058 wall. Also some aluminum
I am pretty fair with a stick. Very little gas experience
Need a TIG that is forgiving for a first timer. Not too pricey.
Any suggestions? Thanks