N Cook wrote:

I often come across corroded or dirty contacts so the amp stops functioning.
If the spriginess of the metal has failed then replace obviously, but what
about the more usual case where it is only corrosion/airborn contaminaion,
not really necessitating pulling the amp apart to replace them. Any ideas
how to deal with.
1/ solvent clean the contact/s
2/ abraid the contacts with file
3/ coat the contacts with something
3/ add compressible material , glued in place, over the spring section to
add closure force
4/ if the sockets are never used for effects etc , bridge tightly across the
contact with fine copper wire, soldered in place, "shorting" the switch - if
plugged into at some future point then the wire will break
5/ any other ideas to reduce the possibility of re-occurance

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/



This thread is gettin' funny.

OK, school-time: what you need is a GC Electronics 9337 "Plastone"
contact burnishing tool. This particular one is exactly the right size
for cleaning Cliff's (and Re-An and other Cliff's-clone) jacks. The
tool is flexible, and can be bent into any necessary shape to
reach the jacks' switch contacts. You insert a plug into the jack
to open the contacts, stick the burnisher between them, and
remove the plug, allowing the contacts to close on the burnisher.
You then saw the burnisher back and forth a few times to remove
the crud. THIS WILL NOT DAMAGE THE CONTACT SURFACES,
regardless of what you might see posted here by anyone else.
Finsh the job off with a shot of Caig D-5 or D-100 between the
contacts.

This GC tool is from the heyday of the telco era, and was designed
to service the phone system when it was largely electro-mechanical.
There is a larger size - the GC 9338 - which is ideal for cleaning
Switchcraft 12A and other American-style open-frame jacks found
on older Fender amps. Best thing about these tools is that they cost
less than two bucks each, and last virtually forever. Here's a dopesheet:

http://ralphselectronics.biz/images/GC-9337.jpg

If you can't find them locally, I sell 'em - and so do a lot
of other distributors. They're an essential part of any
PRO amp tech's kit.

Lord Valve
Expert

VISIT MY WEBSITE: http://www.nebsnow.com/LordValve
I specialize in top quality HAND SELECTED NOS and
current-production vacuum tubes for guitar and
bass amps. Good prices, fast service.
Authorized dealer for QSC amps, Sovtek/Electro-Harmonix,
Behringer, Hammond-Suzuki, Leslie, Rolls, Weber VST, etc.


- Partial Client List -
* Derek Trucks (Allman Brothers Band/Derek Trucks Band/Clapton World Tour) *
* Meatloaf * Catherine Wheel * Yo La Tengo * Let's Go Bowling *
* Kofi Burbridge (DTB) * Tod Smallie (DTB) * Susan Tedeschi *
* Roy Pritts (former head, Audio Engineering Society) *
* Rob Hyckys (guitarist for Commander Cody) * Waky Amps *
* Jamie McLean (guitarist for the Dirty Dozen Brass Band) *
* John Pierce (bassist for Huey Lewis and the News) *
* Rob Eaton (guitarist for Dark Star Orchestra) *
* Detroit Frank DuMont (guitarist, Frank DuMont and the Drivin' Wheels) *
* Coco Montoya * Clint Black * Bill McKay * Mojo Watson * Dick Dale *
* Fleetwood Mac * Tyrin Benoit * Eugene Fodor * Dale Bruning *
* Komet Amplification * Dr. Z * Maven Peal * Blockhead Amps *
* Jim Kelley * Balls Amplification * Roccaforte Amplifiers *
* Gerhart Amplification * Aiken Amplification * Germino Amplification *
* Lots More *

NBS Electronics, 230 South Broadway, Denver, CO 80209-1510
Phone orders/tech support after 1:30 PM Denver time at 303-778-1156

- Our 27h Year -

VISA - MASTERCARD - PAYPAL - DISCOVER

"It ain't braggin', if ya can do it." - Dizzy Dean