In downstate NY, Con Edison requires 4" HDPE conduit for any underground,
from pole riser to meter pan, unless, like you said, if they own the
underground, they'll just leave the #6's in the ground



"Bud--" wrote in message
.. .
HeyBub wrote:
russ-bo wrote:

We have purchased a home built in 1890 that requires an electric
upgrade. It is currently 100A and we would like to upgrade to at
least 200A. The electric runs from a pole behind our backyard, then
underground for about 100 feet, directly into our basement. We live
in the Boston area. About how much should we plan to spend? Any
thoughts on ranges greatly appreciated. Thanks much.


If you do it yourself, you can buy a 200-Amp "kit" at a box store for
about $250. It takes about four hours (exclusive of trips BACK to the box
store for such things as wall anchors, wire nuts, etc.).

Then there is the meter socket, unless existing is rated 200A. And the
service wire has to be upgraded, which requires larger conduit. And the
underground run may or may not have to be replaced depending on the
existing size and whether owned by the customer or utility. If the utility
replaces it, they may charge the customer.

--
bud--