On Feb 4, 8:14 pm, "RBM" rbm2(remove wrote:
Given the wiring scheme you describe, disconnect the red from the outlet,
install a pigtail to the wire nutted blacks and connect that to the outlet
where the red was. Now the outlet is live continuously. You can either run a
two wire cable from this location to the ceiling fan, connected to the
whites on the outlet and the disconnected red, which is controlled by the
wall switch. Or you can run a two wire cable from the switch location and
connect it to the white wires and the red , currently on the switch, leaving
the existing wires attached to the switch intact

wrote in message

oups.com...


THANKS A MILLION!