Thanks for
"jd karnes" wrote in message
news:4P2dnW4rvoYeI17YnZ2dnUVZ_umlnZ2d@wideopenwest .com...
Cliff Hartle wrote:
Why don't you want to roll it with some thing like this?
http://www.ravsupply.com/home/rs1/pa...ler_cover.html
I see spraying making quite a mess with a ton of waste.
Also, how are you going to handle the fumes? The flammable stuff is well
flammable and the nonflammable stuff I think is toxic.
"CC" wrote in message
...
I didn't want to buy a sprayer and tank of adhesive to put down laminate
for a counter top
Has anyone used a quart paint spray gun to apply the contact adhesive
instead of rolling it on
Would the same spray tips work or a larger one be needed.Any thoughts
from someone who works
in a top shop would be appreciated.
CC
the non-flamable contact cement is made by weldwood at least it use to
be. i bought a gallon from granger about 8 years ago. works ok.
Thanks for all the thoughts. I may go ahead and try to use my spray gun,
I'll check with
my local paint supplier and see if they have some advise on a nozzle to try
and see if it works.
have a cheap gun that I haven't used and will advise here how it went.
CC
that I don't use and