View Single Post
  #3   Report Post  
Posted to sci.engr.heat-vent-ac,misc.consumers.house,alt.home.repair
.p.jm@see_my_sig_for_address.com .p.jm@see_my_sig_for_address.com is offline
external usenet poster
 
Posts: 255
Default High Efficiency gas furnace - return air temperature

On 18 Jan 2007 21:12:17 -0800, wrote:

The unit in question is Goodman GMV9509050XBA gas furnace (95% eff.,
90,000 BTU.)
It says in the Installation Instructions (page 7, Location Requirements
& Considerations) that the following must be observed:

"The temperature of the return air entering the furnace is between 55F
and 100F when the furnace is heating."

I am curious why the 55F requirement. I mean, when I'm not in the
house, I would like to set the temp as low as possible in order to save
on my heating bill. I think I could otherwise set it as low as 45-50F
and still keep the water pipes from freezing. But I wonder why I'm not
supposed to go below 55F. What could happen? Could the unit get damaged
and why?

Thanks

P.S. I'm in the Denver, CO area - 5,300 ft altitude, if that matters.


Blow me.



--
Click here every day to feed an animal that needs you today !!!
http://www.theanimalrescuesite.com/

Paul ( pjm @ pobox . com ) - remove spaces to email me
'Some days, it's just not worth chewing through the restraints.'
'With sufficient thrust, pigs fly just fine.'
HVAC/R program for Palm PDA's
Free demo now available online http://pmilligan.net/palm/