View Single Post
  #7   Report Post  
Posted to alt.home.repair
kitchens etc. kitchens etc. is offline
external usenet poster
 
Posts: 36
Default Patching "sleeve" in exterior wall?

hydraulic cement is what you want to use in an opening in concrete block
or cement wall.
not spray foam that is flammable and not UV protected.
(that would be the hackers way)





do it right
or just go back to sleep





"Mikey S." wrote in message
...
| "Great Stuff' is a common brand around here..just go to any hardware
store,
| HD, Lowes, anything like that and ask for a can of expanding foam.
Squirt a
| good amount in the hole, it will expand greatly as it dries, fill the
gaps,
| and ooze out the excess..now here is the trick..DON'T try to clean up
what
| oozes, it's a sticky mess..just let it dry, THEN you clean it up with
a
| knife, it cuts easily and cleanly. There you go..the hole is all
filled and
| weathertight. not fire rated like the firestop stuff used for
penetrations
| through fire rated floors, but you don't need that for this
application.
|
| --
|
| Mike S.
|
| "Jim Tiberio" wrote in message
| ...
|
| "N8N" wrote in message
| oups.com...
|
| Jim Tiberio wrote:
| "N8N" wrote in message
| ps.com...
| Me again... was running some wire to the kitchen last night and
when I
| got down to the breaker box I felt a draft (last night was the
first
| really cold night we've had since moving into the house.)
Apparently
| this @#$%^$^& solar water heater has even more issues than I
knew
| about, there's a freakin' hole in the wall for the piping
between the
| tank and the panel, and I can stick my fingers in it and wiggle
them
| around! This is a basement wall, cinder block with brick facing
on
| the
| exterior. What to fill the hole with? I assume probably
something
| similar to the firestop that I'm used to using at work for
sleeves
| that
| are core drilled through concrete decks, but what exactly is the
| product that I want to buy for this? Please don't tell me I
need to
| use concrete as it is probably way too cold for it to set up
properly
| right now.
|
| thanks,
|
| How big is the gap? When I had central AC installed once they
busted
| out a
| brick, ran the smallish pipe and hose and left a fair sized hole.
I was
| able to fill it with this caustic foam that came from an aerosol
can and
| expanded.
|
| I've got big but slender hands, so it's not a HUGE gap... probably
| something like two 3/4" copper pipes running through a rough 2"
opening
|
| Sounds like the stuff will work, hopefully someone here knows the
name of
| the stuff I'm talking about because I can't remember. These may be
the
| same thing though. I picked mine up at Home Depot so maybe you
could ask
| the
|
|
http://www.conservationstrategies.co...foam_cans.html
|
|
http://www.conservationstrategies.co...ane_sea .html
|
|
http://www.unifireusa.com/retail1/ca...n&categ=7 460
|
|
|