Hello

I checked at the breaker and it was 120... I will double check the wire
connections both at the breaker box and outlet again... Very strange
why this happend all of a sudden. I should be able to check the entire
line in the attick tomorrow to make sure it is not fried somewhere
along the way... In the mean time I am keeping the breaker off.

Thanks

On Dec 11, 1:51 pm, wrote:
wrote:
Hello
I have a single electric socket for my washer which all of a sudden is
only reading 85V. The socket is on its own circuit and I have no idea
why the drop in voltage.
I have removed the socket and tested just the bare wires and get the
same reading.
I have swapped out the circuit breaker (with a known good one) and have
same problem.Are you getting 85V at the breaker? If so, then you've got big problems,
if not then the fault lies in the wiring between the breaker and the
outlet.

Those big problems could be a number of oddball things, possibly power
feeding back through some other device around a break in the system. But
check it the breaker.

What else might be causing this? I am guessing I have a short
somewhere... Any help or suggestions would be appreciated.Thing is, a short that was eating that much power would result in a lot of
heat. You should be able to smell the smoke if this were the case.

John
--
Remove the dead poet to e-mail, tho CC'd posts are unwelcome.
Mean People Suck - It takes two deviations to get cool.
Ask me about joining the NRA.