You have to go into the EEPROM service menu to slightly adjust the
vertical height.
Be carefull doing this. Write down the values you see, so you can
adjust them as
necessary, & do one increment at a time! Adjust P05, & P06. Look below.
Hope this
helps, Dani.


http://myweb.accessus.net/~090/how2adj.html#5.4


2. Press and hold MENU
3. Press POWER
4. Press VOL+
5. P00 and V00 will be displayed
(left and right sides of screen)
6. Release MENU
7. Press VOL+ to set V00 to V76
8. Press CH+ to select and adjustment
that you want to change ( "P00" )
9. Press VOL+ and VOL- to adjust

P01 Hours Freq. P07 Red Bias
P02 Hours Phase P08 Grn Bias
P03 EWDC P09 Blue Bias
P04 EW amp P10 Red Drive
P05 Vert Cent P11 Grn Drive
P06 Vert Size P12 Blue Drive