View Single Post
  #8   Report Post  
Posted to sci.electronics.repair
Sam Goldwasser Sam Goldwasser is offline
external usenet poster
 
Posts: 142
Default Rabbit Ears Problem

"Deke" no writes:

wrote in message
ups.com...

The problem was the that I had not selected TV instead of cable. I
guess I should read the "book" they provide, but since I do not have
cable it never occurred to me that you had to program the set before
you began to watch it.


There may still be way less than optimal performance if the "rabbit ears"
are simply two extendable antennas. UHF wants a different sort of
configuration and is typically a single loop or bow-tie. So, a proper
indoor antenna should have both with a combiner if there is only a single
75 ohm input.

--- sam | Sci.Electronics.Repair FAQ:
http://www.repairfaq.org/
Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/
+Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm
| Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html

Important: Anything sent to the email address in the message header above is
ignored unless my full name AND either lasers or electronics is included in the
subject line. Or, you can contact me via the Feedback Form in the FAQs.