View Single Post
  #10   Report Post  
Posted to alt.home.repair
Pat Pat is offline
external usenet poster
 
Posts: 657
Default Hot/Ground Reversed sockets

Am I the only one confused by this?

You said the 3 outlets were "dead" but you tested them and they tester
said they were reversed? Are they hot or not? Something like a simple
lamp should work okay (but not be safe, but at least work) with the
wires reversed. Something with protections circuitry might not.

Jeffrey wrote:
Hello everyone. Just had a quick question. Our house is only 2 years
old and up until a couple motnhs ago everything seemed to work fine as
far as electricity is concerned. Mysteriously, in our bedroom, 3
sockets stopped working. It was not a breaker, nor a GFCI, etc....Just
these three. Over at home depot I picked up a little tester with the 3
lights that tells what is wrong supposedly. In two of the 3 I got
Hot/Ground Reverse and in one I got Open Neutral. So, in my thinking I
could just open up the sockets and switch the hot ground on the 2 and
then connect the presumed detached neutral on the other. But there has
got to be a reason this happened on 3 at the same time. Is there anyone
out there who can point me in the right direction?