Is tube stiffer than bar?
On Wed, 29 Nov 2006 13:38:26 +0000, The Natural Philosopher
wrote:
Think its broadly proportional to diameter squared..
I.e. the load ends up at a greater diameter spread over a greater area..
Ok ..
Hard steel drill shaft is the least resistant to bending..usually
stainlesl too.
And a total pig to cut. No saw will dio it - needs a grinder.
Tool steel or Stainless (I cut the 3/8 ss bar with a blunt hacksaw in
about 8 strokes?)?
All the best ..
T i m
|