View Single Post
  #10   Report Post  
Posted to rec.woodworking
Doug Brown Doug Brown is offline
external usenet poster
 
Posts: 190
Default Zero clearance insert for Craftsman table saw

A common problem with this group is that nobody seems to really read and
understand many questions.

I too have this saw and I have also wondered how to make my own zero
clearance inserts. The two challenges that I see are the "ears" that fit
into the recesses at the one end plus the fact that the insert can only be
about 1/4" thick due to that rod that pivots with the blade mount.

I haven't done it yet, but I was thinking of using 1/4" baltic birch
plywood, using the existing insert as a template and routing as one person
suggested. That might get an insert of the right shape and thickness to
work. Then for the "ears" I was thinking of using little tabs of 1/4"
baltic birch plywood and glue them and or screw them to the insert in the
right locations and see if that works. Don't forget to drill the two holes
at the front of the insert for the mounting/adjustment screws.

"Bob Mill" wrote in message
oups.com...
That's kinda was I was thinking, but here's a dumb question. Since
they old insert clipped into the table, but plywood insert isn't going
to be able to do that. How do you guys secure your homemade insert
into the opening?

Thanks for all the help.


Bob

C & E wrote:
"Bob Mill" wrote in message
oups.com...
I've had a Craftsman job site table saw for a couple of years now and
have been having a hard time trying to find a zero clearance insert for
it. The inserts that come with it are metal rectangles that hook/latch
into the table top. Here's a link to the saw:
http://www.sears.com/sr/javasr/produ...OL& ihtoken=1

I know this is a long shot, but does anyone have ideas on where I can
find a zero clearance TP for it? Thanks in advance.


Bob


Use some doublesided tape to attach your old plate to piece of high
quality
plywood, use a templae bit in your router and you're in business.