Doug Miller wrote:

I make my throat plates deliberately too thin (1/2" MDF), and use countersunk
flat-head machine screws to adjust them flush to the table. (BTW, Ed Bennett,
if you're still reading this thread -- that's another application for the
TS-Aligner!)

Yup, still reading. Watch your video, it's in there! You can also use
the Angle Attachment Gage to set the blade to 90 degrees (just like
Stoutman's jig). So, you also have that capability. And, of course
there are the angles....

Ed Bennett

http://www.ts-aligner.com