I got this response to my trap switch posts from a real kind gentleman
with a non functional email addy. Good work Darren.

I am not sure if you ever fixed your problem with the pioneer trap
switch.

I had the exact same problem as you, and I was just replacing the
internal fan.

After many hours of searching on the internet, I finally found the fix.

Using the remote control this is what you would need to do (the TV
needs to be in standby

1 - Press the display button once (do not hold, just press and then
release. If not present on your model of remote, then press the button
directly underneath "9" and release)

2 - Wait about 3 seconds after step one and then press (in order):
left - up - left - right - power

The service menu will come up. From here you could tune the television
if desired, but as far as the trap switch is concerned....it is
unlocked!!!!!!!

Just turn the TV off using the power function of the remote control.
Now the TV should operate as normal.....


Please let me know you received this email. I was not sure how to make
a post to your thread on "Google groups," but I did see you asked
around for several months trying to figure it out. Please post this
information for everyone to see, you can even take credit I am just
happy to have my set working again.

Darren


http://groups.google.com/group/sci.e...rch+this+group

http://groups.google.com/group/sci.e...rch+this+group