See if there is a mirror feature or program available for your display card.
If not, look in to upgrading the card for one that can do what you want.

As for reversing the wires to the deflection yoke, if you make a mismatch,
there may be damage to the scan amplifier. Also, when reversing the yoke
wires, most likely the complete convergence alignment of the monitor will
have to be re-done.

--

JANA
_____


wrote in message
oups.com...
Hello,

I have an NEC FP912SB 19" PC monitor that I need to use in a mirrored
envrionment. The plan was to mirror the displayed image by flipping
the horizontal yoke wires. After taking it apart, it looks like it has
3 pairs of wires dealing with the yoke, as opposed to the 2 pairs that
I'm used to seeing in older CRT monitors. I can't find much
documentation on this monitor. Does anybody know what modifications I
would need to make to mirror the image that is displayed on the screen?


Thanks!

-Steve