Cable from stove to ground is copper
"RBM" rbm2(remove wrote in message
...
Is the cable steel? If so, the cable, clamped into the box will ground it.


"Steve Lambert" wrote in message
...
Just installed a dual fuel (gas/220)stove in the kitchen, works
perfectly. My 220 had three #8 wires Black / White / Red, no ground.
Back of stove show a 4 wire hook-up ground being connect just below
center white wire. I did not install a ground as I only had three wire.
Question: should I be concerned about not having it grounded.
Question: Should I run a ground wire from frame of stove to ground.


Thanks in advance