"Eeyore" wrote in message
...


Oppie wrote:

Oh Crud! I snagged the power cord of my HP scanjet 3300 scanner yesterday
and it fell on the floor. The lamp comes on and the motor will move the
carriage. Nothing appears to be out of place or visably broken but it
will
not complete the calibration prior to scaning and comes back with an
error
2117.

I opened it all up and again, nothing appears to be out of wack. The lens
and mirrors are all sitting properly. The home flag on the underside of
the
top cover (used to get home position on carriage) is intact as is the
white/black reference strips just rearward of the document window.

Anybody have some clues on how to trobleshoot past this point. I tried HP
support [being ever hopeful] and all they could tell me was things that I
already found in the FAQ or to 'download new software'. None of it was
useful. I'm hoping that there may be some sort of diagnostic available.

Copied to sci.electronics.repair

My out of warranty HP scanner died on its own a while back, so having little
to lose I opened it up and found an IC in a socket. I wedged it out and
reinserted it and it has worked ever since!

I doubt that you will be so lucky, but what the heck!