View Single Post
  #5   Report Post  
Posted to rec.woodworking
Mike Marlow Mike Marlow is offline
external usenet poster
 
Posts: 352
Default Fire hazards with oil finishes


"Greg D." wrote in message
...


The reason why I posted this request was to get some feedback about
potential risks of fire in a typical workshop based on your
experiences or what you may have heard on the subject. Obviously, you
didn't understand that at all from my initial post.


Hey Greg - I have to confess, when I first read your original post I was a
bit put off. I thought that the last thing I really wanted to see was
another uninformed "reality/experience" article. There are so many of those
kinds of articles out there that although perhaps well intended, do nothing
more than perpetuate myths and misunderstandings. Experiences such as would
be found in a group like this more often reflect anecdotal data and/or
assumptions based on an incomplete investigative process. The net is a
preponderance of poor conclusions. No point in propgating this type of
thing.

Just my thoughts - sorry that they don't support your efforts. I'd really
rather see a more scientific approach to workshop hazards than is likely to
come from what we could give you. Most of us are comfortable with a close
to accurate understanding of what might have happened in a particular
incident and chose not to do that again. It works, but for the sake of an
article I think your readers would deserve more accurate information.

--

-Mike-