View Single Post
  #2   Report Post  
Posted to alt.home.repair
Joseph Meehan Joseph Meehan is offline
external usenet poster
 
Posts: 479
Default Need fence-installing advice


wrote in message
oups.com...
Hi,

I would like to fence my yard for two smallish dogs. After getting
some heart-stopping estimates, I decided I would tackle it myself.
However, in talking to people about how to do it, I've become too
intimidated to try.

I would like to do a picket fence, probably using panels, 3 feet high.
I've been told it's absolutely critical that the posts be exactly the
same height, set in concrete at least 2 feet deep, perfectly squared,
must use several inches of gravel in the bottom, set up props and don't
touch them for days after pouring concrete, don't use the quickie
cement, etc. etc.

I've also been told not to go near HD or Lowe's vinyl panels, "they're
junk." But I'm only fencing in two small dogs, not pigs or a bull.


I have never used them, but my guess is they are not equal to the better
quality materials that are available. You don't need a big dog to cause
problems, normally mother nature supplies plenty of problems and she fails
the neighborhood kids can usually do it.

It
doesn't need to be that sturdy and I don't even want it to be
permanent, although it needs to last for several years. I live in
town, so it has to look presentable, but I can't believe I have to hire
pros and spend $8K+ to get it to look nice.

Do I really have to set the posts in concrete? What's the risk (other
than having it look a little sloppy) if the posts aren't perfectly set?


That depends on the local conditions and how deep the post are set.
If they are not properly set to begin with you are going to have problems.

Are panels a good choice? Is there a compelling argument against
using just any old panels?


Panels are more demanding of getting the post in properly. It is far
easier to fudge errors when building stick than panel.

Is installing a fence really so tricky that
an inexperienced DIYer shouldn't even try?


No it can be done yourself, but it is work and you do need to start with
a good solid foundation (the posts)

I suggest you find a DIY book on the subject for a starter.

Jo Ann



--
Joseph Meehan

Dia duit