On 15 Oct 2006 03:29:37 -0700, "Matty F" wrote:

|Dave Fawthrop wrote:
| On 15 Oct 2006 01:55:22 -0700, "Matty F" wrote:
|
| |What is the recommended way to hold threaded galvanised steel rod in a
| |vise so that the thread is not damaged?
|
| What I was taught in the Apprentice School, long long ago. Drill a hole a
| piece of sheet which is several threads deep, tap with the appropriate
| thread. Hacksaw through the tapped hole. Put your threaded rod through
| the tapped hole, hold the sheet in the vice.
|
| IIRC I still have the screw clamps I made there unfortunately, Whitworth or
| BFS & BA. The ones they made us make had several tapped holes in a line,
| sawn through and a large hole with 1/8 of metal round it to make the clamp
| flexible enough to allow threaded rod to be inserted.
|
| Hope that is understandable ;-)
|
|Actually it's not!
|Why do you need to hacksaw through the tapped hole?

So the rod/bolt is held rigidly when held in the vice.

|Does the sheet remain flat?

It has to be several threads deep the ones we made was 1/8 thick sheet

|Do you put a nut on each side of the sheet, or what stops the rod
|rotating?

The vice pressure stops the rod rotating,
--
Dave Fawthrop dave hyphenologist co uk Google Groups is IME the *worst*
method of accessing usenet. GG subscribers would be well advised get a
newsreader, say Agent, and a newsserver, say news.individual.net. These
will allow them: to see only *new* posts, a killfile, and other goodies.