Perhaps there is something in the hose to the pump or in the pump
itself that is not allowing the water to drain fast enough. With water
in the machine during the spin cycle the drum will not get up to speed.
I suggest opening the bottom panel on the machine and checking thge
hose going from the drum to the pump. Look for a sock or lint
obstruction bobby pin, paper clip etc. Then check the pump itself. On
some machines the pump as a separate belt.
Appliance Repair Aid wrote:
paaji wrote:
Sorry for not providing all the information. Machine does go through
all the cycles and spin in the rinse cycle as well (but i am feeling
that it doesn't spin fast enough to rinse the clothes might be wrong.)
There is no water in the machine after rinse cycle is completed but all
the clothes are still wet and soaked. I looked around if there any
loose wires they all look in good condition. So don't know where to
start troublehooting. I have taken some pictures that might help.
Thanks

Hi,

There is no water in the machine after rinse cycle is completed but all
the clothes are still wet and soaked

http://www.applianceaid.com/inglis_how_itworks.html
http://www.applianceaid.com/inglis-common.html#spin

Some helps/test/info.

jeff.
Appliance Repair Aid
http://www.applianceaid.com/