Hey Knothead,

Not too sure what your post meant. There was a statement but no
question or start of a discussion.

If what you posting was a question about what this drill motor with
the SDS+ chuck is and the "special bits", then maybe I can help.
Hilti makes very good line of industrial tools, of which this is one,
that do not use a standard chuck to hold the tool. This type tool is
most generally used in "hammer mode" in concrete to make holes, or
set anchors with a Carboloy masonary bit. The shank of the tools has
a pair of "ears" forged into the shank, which are what the chuck grips
and drives. They fit quite loose, and they won't fit in anybody
elses tools, and the SDS chuck won't grip any other type but these.
What you might call a captive market.

However, they do have an optional accessory, which is an "ordinary"
drill chuck mounted on the SDS style shank, so that you can use the
drill m,otor to drill steel or what have you with standard twist drill
bits. Other accessories too, but I only know of this one.

Take care.

Brian Lawson,
Bothwell, Ontario.
XXXXXXXXXXXXXXX
On Thu, 15 Jan 2004 06:07:32 GMT, "Knothead"
wrote:


PowerToolreviews.com has review the Hilti TE 6-A. Here is a quote.

Quote

"The SDS+ chuck that comes standard with the Hilti TE 6-A drill uses special
bits that are a little different than your standard bits."


http://www.powertool-reviews.com/

Knothead