View Single Post
  #5   Report Post  
Posted to alt.home.repair
Don Young Don Young is offline
external usenet poster
 
Posts: 674
Default Dishwasher not water tight?


wrote in message
oups.com...
Today our almost new dishwasher started gushing water all over the
floor. I raced home from work and that that perhaps the connections
needed tighting. They appeared to be fine. Apparently our disposal was
clogged and so the dishwasher wasn't draining properly. It appears that
when the water got to high it started pouring out of the lower left
corner of the dishwasher door!

Now I thought that these contraptions are supposed to be water tight,
and not leak if they get too full for some reason. I tested my leak
theory be taking the dishwasher out and tilting it a little (as there
was some water still in the tub) and sure enough it seamed to pour
right out of the seams between the door and tub. The rubber gasket is
there (remember this is an almost new machine). WHY in the world did it
leak? I mean it was gushing water everywhere! I can't ask my wife to
always check the disposal before running a load just to make sure its
not stopped up. What should I do? Should I return and exchange it for
another model that is more "water tight"? Any help is greatly
appreciated.

THorin

The door is only sealed against splashing, not against an excessive water
level. There is often a rather large gap in the gasket in the center of the
bottom.

Don Young