Thread
:
floor boards cupped
View Single Post
#
4
Posted to alt.home.repair
Noozer
external usenet poster
Posts: 326
floor boards cupped
Idiot
wrote in message
oups.com...
dehumidifier
Empresser #124457
The best Games
a href=http://www.gamestotal.com/Multiplayer Online Games/a a
href=http://www.gamestotal.com/Strategy Games/abra
href=http://uc.gamestotal.com/Unification Wars/a - a
href=http://uc.gamestotal.com/Massive Multiplayer Online
Games/abra href=http://gc.gamestotal.com/Galactic Conquest/a -
a href=http://gc.gamestotal.com/Strategy Games/abra
href=http://www.stephenyong.com/runescape.htmRunescape/abra
href=http://www.stephenyong.com/kingsofchaos.htmKings of chaos/abr
wrote:
I put down about 4000 feet of floor in my new house. It is oad in 2
1/4 , 3, and 4 inch widths. It is all over a crawl space. The wood was
allowed to acclimate prior to installation. We put down 15# felt paper
prior to the wood. Stapled it every 8-10 inches. The wood was then left
for a week or two before sanding. When we finished, it was perfectly
flat. Left it alone for a week prior to putting down a coat of sealer
and 3 coats of Bon Kemi MEGA.
After a couple of weeks the the edges of the board began to curl
upward. Not a lot, but enough to be noticable.
I suspect the crawl space, which is dry, but a bit humid. The bottom is
covered with viscuine that wraps up the sidesabout 12 inches. The
walls have 2 inches of pink foam board - which overlaps and covers the
edge of the vapor barrier. I don't know if the foam board is also a
vapor barrier. I have opened all the crawl space vents and am waiting
for winter to see if dry air will get rid of the problem.
Am I on the right track? If it does go away, what should I do to
prevent it next Spring?
Len
Reply With Quote
Noozer
View Public Profile
Find all posts by Noozer