OK, I'll give it a try without it.

Thanks.

Jan

"Michael Kennedy" wrote in message
...
Possibly GND?
Or I guess the real question is does it work without it..
Its pretty easy to figure out which pin is which by trial and error on
monitors.

- Mike

"Jack" wrote in message
...
Nope, it was lost. That's the problem ;-)

Jan

"Meat Plow" wrote in message
news
On Wed, 04 Oct 2006 22:30:23 +0300, Jack Has Frothed:


"Meat Plow" wrote in message
news On Wed, 04 Oct 2006 21:04:54 +0300, Jack Has Frothed:

I had one of these brought in, since the customer had accidentally
severed
the VGA connector off from end of the cable.

I figured out all but one connection. Where I connect the "VGA CON"
line on the HD15 connector?

The service manual does not have this info.

Thanks,

Jan
Finland

Pin assignments
1 RED Red video signal
2 GREEN Green video signal
3 BLUE Blue video signal
4 N/C Not connected
5 GND Ground
6 RED_RTN Red video signal return
7 GREEN_RTN Green video signal return 8 BLUE_RTN Blue video signal
return
9 N/C Not connected
10 GND Ground
11 N/C Not connected
12 SDA I2C data
13 HSYNC Horizontal synchronization signal 14 VSYNC Vertical
synchronization signal 15 SCL I2C clock

--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794

Thanks, but in Viewsonic service manual, there is a "VGA CON" coming
from
the circuit and going to the VGA connector. This is what I was looking
for.


Jan

You don't have the severed HD15?
--
Pierre Salinger Memorial Hook, Line & Sinker, June 2004

COOSN-266-06-25794