TimR (in mJDQg.532$tO5.100@fed1read10) said:

| I have a number of rough edged 8" wide planks I need to have on
| straight edge on. On my table saw with a Bessemer fence...is there
| a technique that I can create a straight sedge on one edge of the
| lumber ?

Tim...

Tacking a straight board to one side of the board to be straightened
sounds like a good answer for a few boards.

If you have a quantity of boards, then you might want to take a look
at http://www.iedu.com/DeSoto/BoardSled.html - works for me.

--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto