Hi,

I have no chuck other than a faceplate, and so use my hot glue gun for
most things. I simply run a fairly think ring of glue around the the
middle of the block, (I use a block of wood screwed to the faceplate)
and stick the wood on.

It's never come off, but does pry of easily with a flat chisel a the
end.

So my answer is - I use whichever glue sticks are the cheapest at
B&Q...

Steve


Canchippy wrote:
wrote:
Hi Bruce

I use the hotmelt glue rarely, however it is one more arrow in your
quiver so to speak, and there are times it comes in handy.

First, you use it on dry wood, have your glue gun on for a long time so
it is really heated up well, then I use a propane torch to warm up the
wood so the glue doesn't cool as quickly, and than work fast, start
gluing in the center and spiral to the edge, join and clamp it down,
DONE.
I use a heat gun to warm the wood and the bowl. You can even get the
glue to a higher temperature with no fear of flames. If a recess is
turned in the scrap block and a foot turned to match then the whole
assembly will still stay concentric whilst drying and re-mounting for
final truing is a breeze!
Peter
Visit my site at:
http://www.oldtoolsshop.com/Galoots/pHyde/