How to Cut Corrugated Metal Roofing?
a friend was helping me with the corrugated metal once.
we tried the backward saw blade and it worked just fine. but be careful-the
metal will flop around. have someone hold it if you can.
also, as someone suggested, use goggles and ear plugs.
"Jones" wrote in message
news:2006090609455616807-at@yourhousenet...
Eduardo blew some of the 2' x 12' galvanized, corrugated steel roofing
material off of my barn, and I had to replace most of 2 sheets.
I didn't have any power on Saturday to cut it off, so I just nailed it
up and let it run long off the eave of the roof, but now I have to cut
it off flush with the rest of the roof.
Can anyone tell me what I should use to cut this stuff?
My brother (a contractor) says I should just put a plywood blade into
my circular saw backwards, wear safety goggles and earplugs, grit my
teeth and let 'er rip ... but somehow that sounds a little scary to me
on an 18' ladder.
Any ideas?
Thanks,
Joe
|