View Single Post
  #17   Report Post  
Posted to alt.home.repair
EXT EXT is offline
external usenet poster
 
Posts: 1,661
Default Set fence post in concrete, dirt, or gravel?


"Ook" Ook Don't send me any freakin' spam at zootal dot com delete the
Don't send me any freakin' spam wrote in message
...

wrote in message
ups.com...

Ook wrote:
Concrete is obviousl a major PITA to replace, but how long do they last
today? In 1966 they used better preservative, and posts would last 50
years.
What can I do to my posts today to get at least a couple of decades out
of
it?


I don't know how long modern wood posts would last. But it's gotta be
easier and cheaper to put screws/nails into wood than, say, a cast iron
pipe. And it's easier than putting a stainless steel achor bolt
into the top of a cast iron pipe filled with concrete onto which you
could hang your fence wood.

But if you go that way, let us know how it works out. It might look
cool.


I was at the Oregon State Fair yesterday, and one vendor had a system
where you pour your concrete plug into the ground and have a square
concrete post coming up a few inches out of the ground. Fence post gets
bolted to that. Fence post never touches the ground. If fence post rots
away, you unbolt it and bolt a new one in it's place. I'd be interested in
doing this if I could find instructions and parts.

I have used the steel anchors that are designed to be pounded into the
ground, but I set them into concrete. You can replace the posts if the
bottom rots, and if you keep the steel painted. When installing, take extra
care to keep them level because a slight angle can create a crooked post.