Gluing plexiglass to polyethylene
"Lew Hodgett" wrote in message
ink.net...
blueman wrote:
I would like to glue a 7" wide extension strip of 1/8" PLEXIGLASS to a
POLYETHYLENE window well cover.
snip
Never going to happen, but you can still get a seal between the materials.
Rough up both surfaces with a 36 grit right angle sander to provide a
rough surface, then apply 3M 5300 caulk.
Allow 1 week to cure.
I was going to suggest 3M 5200. It will glue anything.
|