thanks for the link
cj

TakenEvent wrote:
"cj" wrote in message
...

i am having problems with my ex-cell model exwgv2121. the motor fires
right up but when i pull the trigger on the handle i get a short burst
of high pressure water and then it just ****es out. once i let go of the
trigger the motor bogs down for a second and then idles normal ( i guess
it is building up pressure again)...looking at the pump there seems to
be a couple of adjusting screws but i dont have a manual so I'm not
quite sure what to do. what types of things can go wrong with these
types of power washers?
any help would be appreciated
cj



Usually when that happens it's because there is still some air in the line.
After a few minutes, it should take care of itself. The other thing to
consider is how much water the machine is getting. If your water pressure
can't keep up with the power washer, it will constantly try to repressurize.
Also, the first blast will always have more pressure, that's why you never
pull the trigger while aiming at whatever you're power washing, unless it's
impervious to chipping, flaking, or gouging.

Here's a link to the manual.

http://www.devap.com/PDF/RM/D21684-E.pdf