DIYbanter - View Single Post

Rich256

wrote:
Hi.
Yesterday while I was mowing the lawn, my mower engine suddenly
stopped. The blade continued to spin until it slowed to a stop. It did
not strike any objects. It was working fine up to this point.

When I attempt to start the mower by pulling the string, the blade will
spin quietly, but I do not hear the engine try to engage. Additionally,
it feels "loose" when I pull the string; previously, I could hear the
engine cranking, but not anymore.

I'm not very experienced with lawn mower or small engine repair, but I
did some basic troubleshooting by looking at guides on the web. The
flywheel key, and the blade adaptor key both seem to be intact. The gas
is fresh. Oil was recently filled.

My mower is a Craftsman, model 143.996504 with a 6.5 Eager-1 (Tecumseh)
4-cycle engine (917.377431).

Any ideas?

Thanks.

I will go with the lost compression. If you are up to it you could pull
off the head and see if a valve is broke. I do remember one one rare
occasion a valve stuck open. Just took some lubricant to get it moving
again.