DIYbanter - View Single Post

[email protected]

wrote:
Fill valve replaced 3 months ago when water quit going to Frigidare
icemaker side by side refrigerator although water dispenser on the door
worked, Model GLR267ZCB3 built March 04.

Problem has now returned except I get no water to either icemaker or
door. Do I have to replace the fill valve again or can the valve be
taken apart to see if trash or debris has blocked one of the valves?
When I disconnected the water line to the fill valve there was some
debris in the water.

Water pressure to fill valve is about 40 psi. The fridge has a new
filter in place. The valve has 3 coils, all of them show 180-300 ohms
of resistense. ( one coil sends water to filter, the other two coils
send water to icemaker and door). The line carrying water into the
icemaker from the fill valve is not blocked since I can blow air
through it.

Thanks,

Buddy

Confirm your getting power to the valve, you will probably have to
replace it again