Lew Hodgett wrote:
The3rd Earl Of Derby wrote:


I see, I'd rather adjust the router in one go rather
than...cut,measure,adjust,cut measure,adjust.


What ever floats your boat.

Lew

No offence like.

I've had a think and all it takes is a bit of wood with increments of half
inch steps at one end, increments of 1/8th steps in the middle and 1/16th
steps at the other end, marked on the wood.
Position the wood against the fence and move the fence near to the router
bit in question and adjust the height.

:-)

--
Sir Benjamin Middlethwaite