Jeff Wisnia wrote:
peter wrote:
I drained my water heater yesterday (1 year after installation). I turned
off the cold water supply into the water heater, turned off the gas, open a
hot water faucet on the second floor, and then open the drain valve on the
water heater.

About one gallon of water comes out, then no more. I have to open the
pressure relief valve to let the rest of the water out. Why is this?
Shouldn't the open faucet on the second floor break the vacuum and allow all
water to come out?

Normally I'd expecy it should, but maybe it wouldn't work as expected if
you had an unusual plumbing run and the hot water line from the heater
first went down to near the heater's floor level somewhere before it
headed upstairs.

Just a WAG; someone tell please me if I'm way off base on the physics of
that one.

Jeff

--
Jeffry Wisnia
(W1BSV + Brass Rat '57 EE)
"What do you expect from a pig but a grunt?"

I'm still scratching my head trying to think of why opening the hot
water faucet didn't work. I don't think your explanation would explain
it. Might slow it down a bit but it should still drain.

Harry K