homer2654 wrote:

OK, I just built a fence out of pressure treated wood (the crap from
Home Depot which is not redried) a couple of weeks ago. It's an infill
type fence using the rough hewn dog-eared slats cut to about 5-6 feet
long held in only at the top and bottom, no middle cross beam. Anyway,
within several days huge gaps developed between the slats, presumably
as they dried. I can deal with that. What I can't deal with is warping
and twisting, which has also happened.

My questions to you guys with pressure treated wood experience:

1. Can I avoid shrinkage, warping, and twisting if I use special
pressure treated + redried wood and immediately stain it, or does
redried wood also shrink and warp to some extent?

2. Will I avoid shrinkage, warping, and twisting if I use the non
re-dried wood from HD and immediately seal it (even though it's wet)
with sealers approved for immediate sealing, like Wolman's "raincoat?",
or will it still shrink etc?

Thanks in advance


You have discovered why I will NOT install treated pickets on
a fence. It will warp and then I will get complaints. Then,
even if there were no complaints, someone will ask the owners
who built their fence and they will give out my company name.

I made an attempt to use treated pickets on a fence with fair
results. We ran four horizontal rails, then carefully screwed
each picket. The results were the best you could get with
pressure treated fencing. Of course, the extra cost for the
added rails, plus the extra care (and time) to screw rather
than nail caused the final product to cost more than a cedar
picket fence would have cost.

--
Robert Allison
Rimshot, Inc.
Georgetown, TX