Dani wrote:
Had keystone pix, & very poor convergence, customer totally adjusted
the advanced customer convergence menu. CR14800 leaky, & C 14800 had a
bad connection, &
arced out straining CR 14800. Rapaired the set, & did a full
convergence, picture
tubes are all blurry, & raster is quite bright. Even with the red,
green, & blue G 2
set to zero, there is still a visible blue raster. With minimum
settings of all three G 2,
to get a grey scale, the raster is still bright, with contrast, &
brightness set to zero.
Just like when you put a new flyback in on of these sets. How can I
make it less bright,
& washed out? How do check how many hours are on the CRT's? Isn't there
a warranty clock on some of these units? Thanks, Dani.

Sounds like the AKB auto adjust needs performed using Chipper Check.