Thread
:
Panasonic 28in television "afterglow" image
View Single Post
#
2
Posted to sci.electronics.repair
Dani
external usenet poster
Posts: 304
Panasonic 28in television "afterglow" image
Great T.V. Long lasting unit. Your relay likely has the contacts stuck.
Just get it
replaced with the same specs. The CRT (tube) is supposed to get hot. If
your'e asking these type of questions...please be carefull. You could
get hurt badly, or worse! Get someone who knows T.V.'s to get it fixed.
Dani.
wrote:
Here is a strange one. The only similar issue I can find is the
"afterglow" effect mentioned on older RCA televisions. Anyway, I have
a Panasonic 28" TV. It is quite a few years old. Sometimes (50%+),
after turning it off, the video image still appears on the screen (in
full motion). Unlike the RCA "afterglow" issue, this isn't just a dot
in the middle of the screen, it is the full video image in normal time.
The image is much darker than when the TV is turned on, but, it is
very clear. It does this even when using the VIDEO1 & VIDEO2 inputs
(not just broadcast TV). If I turn the TV back on, switch channels (or
video modes) and then turn it back off, it finally goes totally black.
I have also noticed that the very back part of the tube is glowing hot.
I don't know if that is normal, but, I assume its not. No other
problems with the television. Assuming it is on it's last legs, I am
starting to look for a replacement and am shutting it off at the power
strip in the meantime. Any ideas?
Reply With Quote
Dani
View Public Profile
Find all posts by Dani