View Single Post
  #9   Report Post  
Posted to uk.d-i-y
Andy Hall Andy Hall is offline
external usenet poster
 
Posts: 9,122
Default Controlling temperature of water in radiators.

On Mon, 3 Jul 2006 18:42:06 +0100, Doctor Drivel wrote
(in article ews.net):


"Andy Hall" aka Matt wrote in message
...
On Mon, 3 Jul 2006 17:59:36 +0100, Tony Bryer wrote
(in article ):

On Mon, 3 Jul 2006 17:32:47 +0100 Anode wrote :
Is there any setup that would give me the necessary heat output but in a
more balanced way, so the radiators will be on for longer but at an
appropriately lower temperature, with the period in the cycle when the
radiators are off being correspondingly much reduced?

The magic word is compensator - either
sensing load or weather and turning
the flow temp up or down as necessary.
They are available as an optional
extra on a number of the better boilers.


True...

Not to be confused with external boiler
management boxes which use an
external temperature sensor.
These are alleged to make some improvement in
terms of energy use in that they provide
the heating system with "advanced
knowledge" of changes in outside temperature,
but they drive the boiler on
and off to do so which doesn't really address
the initial requirement.


Matt, what ********. It does address the intial requirement in that the
rads are at the ideal temperature dictated by outside weather conditions.
Sirry irriot. It does this by switching the burner using electronic
anti-cycle control. Sirry irriot.


No. The radiator temperatures will cycle up and down as the burner is turned
on and off by the external controller.

The correct solution is to use something that is integral and analogue to the
main boiler controller.