Seeking source for torque wrench extensions
In article , Leo
Lichtman says...
jim rozen wrote: (clip) Then the existing torque wrench goes into the
12-point socket, and the socket you want to use goes on the other male end.
Key to making this work is purchasing the items used or otherwise,
inexpensively
^^^^^^^^^^^^^^
That idea might be less expensive to carry out if you just welded a 1/2"
drive socket to the end of a 1/2" breaker bar.
It all depends what one has available in the junk box.
But whatever he does, *don't* weld the items together.
I've found that the HAZ becomes brittle sometimes that
way, and the tool will snap at the weld. Brazing is
really better.
Jim
==================================================
please reply to:
JRR(zero) at yktvmv (dot) vnet (dot) ibm (dot) com
==================================================
|