"PJ" wrote in message
...
Sparks wrote:
"PJ" wrote in message
http://www.tarags.demon.co.uk/conn1.jpg
http://www.tarags.demon.co.uk/conn2.jpg
http://www.tarags.demon.co.uk/conn3.jpg
http://www.tarags.demon.co.uk/conn4.jpg
... to give you some indication of scale, the external diameter of the
ring around the pins measures 9.55mm with my digital calipers.
:-) I have one on my old old old Ferguson Video VHS-C camera :-)
Ahh. But do you know where to get new ones that I can make up into my own
cable?
It might be this one, the picture in the CPC paper catalogue certainly looks
promising...
http://cpc.farnell.com/jsp/endecaSea...=AV07370&N=411
Alternatively, you could cut the current cable in half, connect one of these
to the wire with the funny connector on
http://cpc.farnell.com/jsp/endecaSea...=AV10583&N=411
Then put one of these on the modulator...
http://cpc.farnell.com/jsp/endecaSea...=CN00052&N=411
....and also one of the above on this chopping off the 3.5mm plug...
http://cpc.farnell.com/jsp/endecaSea...=AV07342&N=411
On mine, if you look at the connector on the cable, with the biggest
notch at the top, going clockwise, assuming the pin at 1 o'clock is pin
1...
Audio + = 3
Audio - = 5
Video + = 8
Video - = 7
+ meaning the centre pin on an RCA plug, and - meaning the screen.
Did you mean to write two plusses for the video, on both pins 8 and 7? If
you did, I'm having a failure of understanding...
No! my bad :-)
now corrected as
Video + = 8
Video - = 7
Sparks...