Mitsubishi Camcorder pinout
"PJ" wrote in message
...
Dave Plowman (News) wrote:
Can you open up the modulator and trace the wiring?
That's plan B. Here goes...
... later.
Four wires terminating at a socket on the modulator PCB. Each pin is
labeled on the PCB, although the labels are partially obscured by the
socket. They appear to read (with corresponding wire colours):
A (Red)
G (Brown)
V (White)
B (Black)
Do you have a multi-meter?
If so, connect the cable to the camera
turn on camera and play a tape (or put it into camera mode!)
Now poke the connections inside the modulator and look for the 5v
It's probably on Red and Black
now measure the -ve from the 5v to the other two connections, one of them
will show about 1v (varying) this is your video signal - the last one is
audio :-)
My guess would be...
A (Red) - +5v
G (Brown) - Audio
V (White) - Video
B (Black) - Ground
But you won't know unless you poke it :-)
Sparks...
|